TC-24-10 - Te Technology TC-24-10 Cool-Only/Heat-Only Temperature Controller for Thermoelectric Devices Simple...
Request Quote
For Price
- Part Number:
- TC-24-10
- Model Number:
- TC-24-10
- Make:
- TE TECHNOLOGY
- Lead Time:
- Available
- Qty In Stock:
- Available
Te Technology TC-24-10 Cool-Only/Heat-Only Temperature Controller for Thermoelectric Devices Simple Type: Temperature Controller
The TC-24-10 provides cool-only or heat-only temperature control for thermoelectric devices. A jumper on the printed circuit board selects cooling or heating control. The controller uses single solid-state MOSFET device to modulate the thermoelectric device current based on the temperature set point. This methodology does not induce thermal cycling and so will not affect the thermoelectric module reliability as can on-off controllers. Adjustments for set-point, proportional gain, and integral gain are made via variable resistors (potentiometers) located on the printed circuit board. These adjustment values can be pre-programmed into the controller for large volume applications thus negating the need to adjust each controller individually. Mechanically, the controller’s printed circuit board is mounted to a metal bracket that is suitable for either horizontal or vertical orientation. The controller can operate in ambient temperatures from 0 °C up to 50 °C without generally requiring additional heat sinking.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Accepts TE Technology’s standard 15 K thermistors
- External power supply(s) required
- General purpose resolution and stability
- Low voltage TE device control capability
- Proportional and Integral control action, adjustments made via potentiometers
- Protected output stage
- RoHS Compliant
- Single-direction control mode—cool only or heat only (selectable via jumper)
- Solid-state output stage with thermal protection
Specifications
- Control temperature: -20°C to 100°C
- Input voltage: 9 to 26 VDC in single power supply mode; 9 to 26 VDC (for microprocessor); 0 up to 50 VDC (for thermoelectric load) when using two power supplies
- Integral (I) rate adjustment: 0 to 2.55 repeats per minute
- Load Rating: Self-contained, 0 A to 10 A (no additional heat sink required)
- Operating temperature range: 0 °C to 50°C
- Physical dimensions: 7.0 cm x 5.1 cm x 3.8 cm
- Proportional (P) and Integral (I) Control; Proportional (P) Bandwidth adjus: 0.5°C to 5°C,
- Pulse-width modulation frequency: 1000 Hz
- Temperature resolution: 0.15°C; typical control stability of up to +/-0.5 °C
- Thermistor Capability: 15K ohm
Applications
- None Available
Aliases
- None Available